UTS ElectricPros - authorized Cummins generator dealer

Tarrant County · Texas

Generator installation in Fort Worth, TX

A typical 20kW Cummins whole-house generator installed in Fort Worth is estimated at $13,500–$17,000. Estimate only. Every installation is different; a site visit is required to determine whether your installation will cost less or more than this estimate. The RS20A unit alone is $5,925.25. We pull the Fort Worth permit and meet the inspector. Electric delivery is Oncor Electric Delivery for most addresses, with CoServ Electric, Tri-County Electric Cooperative and United Cooperative Services in parts of the city; natural gas is Atmos Energy Mid-Tex, CoServ Gas or SiEnergy, depending on the address.

Authorized Cummins dealer · TECL #40628 · our own electricians, no subcontracted electrical work

Fort Worth at a glance

CountyTarrant County
Electric deliveryOncor Electric Delivery for most addresses, with CoServ Electric, Tri-County Electric Cooperative and United Cooperative Services in parts of the city
Natural gasAtmos Energy Mid-Tex, CoServ Gas or SiEnergy, depending on the address
Permit officeDevelopment Services Department
Published permit feepriced by capacity rather than a flat fee — $6.10 up to 10kW, $9.85 to 20kW, $19.75 above, plus a service or subpanel charge
Typical 20kW installed$13,500 – $17,000
Estimate only; installations vary, and a site visit determines your price.
Site surveyFree, about 45 minutes

Permits and inspection in Fort Worth

Permits go through Development Services Department; the published fee is priced by capacity rather than a flat fee — $6.10 up to 10kW, $9.85 to 20kW, $19.75 above, plus a service or subpanel charge.

Fort Worth prices the generator permit by capacity rather than charging a flat fee. Where a third party performs the inspections, the permit fee drops to 35 percent. Its zoning code was checked directly and contains no generator or mechanical equipment provision.

Source: City of Fort Worth Development Fees Schedule, Ordinance 26-28781, effective October 1, 2026, checked 2026-10-09. Other cities side by side: generator permit fees by DFW city.

State law limits what Fort Worth may require on a home system of 50kW or less, and a qualified third party may do the review and inspection instead: Texas Local Government Code § 229.102 and Texas Local Government Code § 247.0025. Your HOA cannot ban the generator either (Property Code § 202.019).

Served by CoServ? CoServ’s standby generator requirements: the application, the open-transition transfer switch and the no-export rule.

Utilities that affect your install

Electric delivery in Fort Worth is Oncor Electric Delivery for most addresses, with CoServ Electric, Tri-County Electric Cooperative and United Cooperative Services in parts of the city. The boundary runs through neighborhoods, so two houses on one street can have different providers, and each approves a service-entrance tie-in its own way. Your bill shows which you have.

Natural gas is Atmos Energy Mid-Tex, CoServ Gas or SiEnergy, depending on the address. If the meter cannot carry the generator on top of the furnace, water heater and other appliances, the utility has to upsize it, which is a separate request with its own timeline. How gas line sizing works.

Already have solar? It has to connect on the utility side of the transfer switch so the generator never feeds the inverters, and the disconnect and meter rules come from Oncor Electric Delivery or CoServ Electric or Tri-County Electric Cooperative or United Cooperative Services, whichever serves your address. Why, and how the main DFW utilities handle it.

Suburban street of the kind the Dallas-Fort Worth service area is made up of
Cummins manufacturer photography. Not a photograph of Fort Worth.

Who does the work

UTS ElectricPros is the authorized Cummins dealer. Installation is done by our own electricians working as Clements Electric, our dba, from 2100 S Great Southwest Pkwy, Suite 505, Grand Prairie, under TECL #40628. The installation process runs survey, written price, permit, install, inspection and commissioning under load.

Our installation crews work under the Clements Electric name, which also covers repairs, maintenance and other electrical work in Fort Worth. Clements Electric standby generator installation and service in Fort Worth.

Cummins RS17A 17kW air-cooled Natural Gas / LP Vapor standby generator

Cummins RS17A

Air-cooled · Natural Gas / LP Vapor

Equipment from
$5,326.86

Equipment only. Installation quoted after a free site survey.

View details
Cummins RS20AC 20kW air-cooled Natural Gas / LP Vapor standby generator

Cummins RS20AC

Air-cooled · Natural Gas / LP Vapor

ATS included
Equipment from
$6,868.48

Equipment only. Installation quoted after a free site survey.

View details
Cummins RS13A 13kW air-cooled Natural Gas / LP Vapor standby generator

Cummins RS13A

Air-cooled · Natural Gas / LP Vapor

Equipment from
$4,419.04

Equipment only. Installation quoted after a free site survey.

View details

Other Cummins equipment for Fort Worth

Installed in Fort Worth: Home standby generators · Light commercial diesel generators · Agricultural standby generators · Automatic transfer switches

Shipped to Fort Worth, no installation needed: Portable generators · RV generators · Mobile trailer-mounted diesel generators

Generator questions from Fort Worth homeowners

How much does a whole house generator cost in Fort Worth?

A typical 20kW Cummins system installed in Fort Worth is estimated at $13,500 to $17,000, including the pad, transfer switch, permit and commissioning, with the gas line included as its own line item. Estimate only. Every installation is different; a site visit is required to determine whether your installation will cost less or more than this estimate. The RS20A unit itself is $5,925.25. Your figure depends on the distance from the generator to the gas meter and the electrical panel and on whether the gas meter needs upsizing, so it is fixed in writing after a free survey.

Do I need a permit for a generator in Fort Worth?

Yes. Permits go through Development Services Department; the published fee is priced by capacity rather than a flat fee — $6.10 up to 10kW, $9.85 to 20kW, $19.75 above, plus a service or subpanel charge. We pull the permit and meet the inspector, and it is inside the installation quote.

Can Fort Worth regulate my home generator install?

Only within limits. Texas Local Government Code § 229.102 bars a city from regulating the installation or inspection of a residential backup system of 50kW or less where the city does not own the electric utility. Since 2025, Texas Local Government Code § 247.0025 also lets a qualified third party do the plan review and inspection, and the city must then issue the permit by the third business day after notice.

Who provides gas and electric service in Fort Worth?

Electric delivery is Oncor Electric Delivery for most addresses, with CoServ Electric, Tri-County Electric Cooperative and United Cooperative Services in parts of the city. Natural gas is Atmos Energy Mid-Tex, CoServ Gas or SiEnergy, depending on the address. The electric utility sets how the transfer switch ties in at the meter; the gas utility decides whether your meter can carry the generator's extra demand. Service territory does not follow city limits, so we confirm both from your bill before quoting.

Who installs the generator in Fort Worth?

Our own licensed electricians, working as Clements Electric, the dba of UTS ElectricPros, LLC, from 2100 S Great Southwest Pkwy, Suite 505, Grand Prairie, under TECL #40628. The gas line is run by a licensed plumber we hire and warrant, or by your own plumber if you prefer. UTS ElectricPros is the authorized Cummins dealer, so the same company sells, installs and handles the warranty.

We also install nearby in Tarrant County

Call Now Get a Quote